Whirlpool refrigerator not cooling or freezing

Whirlpool refrigerator not cooling or freezing. Whirlpool refrigerators are known for producing high-quality cooling products for their customers. The cooling system is both efficient and easy-to-operate at the same time but on occasions, you would see people complaining about food spoilage and lack of cooling due to machinery heat up.

Whirlpool refrigerator not cooling or freezing

If you are facing the same problem then this article will answer all the uncertainties in your mind. We have compiled some of the most common reasons for the ineffectiveness of your machine.

The condenser wiring

The condenser wiring is the first thing to check when you are facing cooling issues. Due to consecutive working, without proper cleaning, the dirt gets accumulated on the wires. A thick layer of dirt stops the release of heat outside the refrigerator, so the coil dissipates heat into the refrigerator.

During this issue, the cooling system works properly but the cooling is neutralized by the heat transmitted by the condenser coil. If your refrigerator is getting noisier then this can be an indication that the coils are clogged.

Solution:

The solution to this problem is pretty easy. You can clean the coils on your own using the following method:

  • First thing first, unplug the refrigerator and pull it away from the wall to give you a better position to clean. The coil is generally situated at the backside but you might find it at the rear bottom.
  • Vacuum the coil before starting the cleaning.
  • Use a dry brush to scrub the dirt off. There are several cleaning brushes available to help you clean conveniently.
  • Vacuum the remaining dirt.

The rubber sealThe Rubber Seal

The seal attached to the door of your refrigerator is magnetic. Users usually experience a loose seal after repeated opening and closing of the door.

A well-packed seal is necessary to guaranteed a leakage-free cooling. In order to ensure that the cool air stays inside your fridge, repair the magnetic strip.

Solution:

Fixing the door seal is often a technical task to perform. There are different ways to solve this problem. You can learn it from the video illustrations available on the internet or call a technician to help your cause.

The temperature settings:

There is a possibility that your temperature is not properly set. Although this aspect might seem simple, there is still a possibility that you are doing something wrong.

Solution:

Refer to the Whirlpool user manual. You would find the most optimal setting for your usage.

The power failure:

The power cord is one of the most important parts of any electrical appliance. Your Whirlpool refrigerator is not an exception in this case.

Solution:

  • Check the plug:

Firstly, make sure that the plug is fitted correctly in the socket. A loose power connection deteriorates the voltage.

  • Check your cord:

There is a chance that the cord might be damaged at some point. Thoroughly check the power cable and tape the scratched area. We would suggest you replace the cord (for a guaranteed solution).

  • ¬†Circuit breaker:

Check if your fuse is blown or not. A problem in your circuit breaker might be the reason for power distortion.

Faulty part:

If none of the above-mentioned solutions worked for you then it means that fault might lie somewhere else. There might be a problem with the motor, thermostat, or refrigeration fan.

Solution:

We would advise you to call an expert to solve this problem, as it requires professional expertise to repair a broken part. These are Possible solution of whirlpool side by side refrigerator not cooling or freezing.

Check Out Ge profile refrigerator not cooling

Leave a Comment