Whirlpool is a gas dryer innovative technique discover for drying purposes. This is called the small laundry of any room. You can wash and dry the expensive outfit of your family and keep save them from over-drying.
In this dryer, you do not need to repeat the wash cycle again and again. It’s can be complete the wash and dry cycle within one cycle.
It works fast and ferrous but sometimes the whirlpool dryer creates problems. Most of the problems you can solve at home are no need to call the technician as it saves your time and money. Now we discuss the issues with Whirlpool duet dryer troubleshooting.
These are some common problems that you can fix through Whirlpool duet dryer troubleshooting:
- Dryer still Beep
- Auto shut off
- Dryer not spin but properly heated
- Overheating Problem
- Drum Light not On
Dryer still Beep
This is a simple problem and easy to solve within a few minutes. You are judge this issue when listening to the voice like a smoke detector. Usually, this is happening as a result of a bad control panel.
It starts beeping and gives different types of voice it means the battery is low. The solution to this problem is you can unplug to reset the dryer.
If the problem is not solved then you need to replace it. This problem is easy to solve at home when you have little know-how about electronic activities. If you call any technician, tell him properly the model number and problem of the dryer too.
Auto shut off
It is another troubleshooting problem when you start the dryer it makes a noise in a heavy voice and automatic shutoff after a few minutes. Then you will restart the dryer again it’s quick shutoff again. Heavy noise means there is something scrolling with the drum that creates a hurdle on the dryer moves freely. It’s maybe an electrical issue.
In this way, you can check first the main electricity switch is transfer proper voltage or not. If there is a problem with any electric component of the dryer must replace it with a new one. In this way, you can also check the thermal cut-off fuse is blow or not.
Dryer not spin but properly heated
The most common problem sometimes dryer is that they work and heat properly but the drum is not spin. Usually, the reason is the belt is broken so the dryer is not spinning.
When you provide the belt, some resistance works properly and moves easily. A broken belt is also created many other technical problems like its create noise and not dry the moisturizing from the clothes. Not so serious problems are easy to solve at home.
Overheating Problem
A heating element is placed in the whirlpool before entering the air drum. If these heat element is partially shorted out and continuously produce heat while exceeding normal temperature. As a result, the drum is overheated and creates fault.
In this condition, you are using a multimeter for testing and for solving this issue soon. Replace this heating element with a new one and also check all these other heat components placed in the dryer.
Drum Light not On
This is another issue of whirlpool troubleshooting. When you give the current to the dryer its door is on or the switch works but the light which controls the electrical system is not on the same circuit.
It means you have no need to change the master switch you need to change the drum internal light. This problem is not easy to solve at home you need to call the technician for the solution to this problem. Whirlpool duet dryer troubleshooting. Check out if your Whirlpool ice maker not working.
