Whirlpool dishwasher is not draining

Whirlpool Dishwasher Is Not Draining

This is the common problem dishwasher is not properly dry, or its drying speed is slow. Your dishwasher works perfectly when keeping the water settling in the drain hose otherwise its creates some problems in draining.

It is very easy to identify these causes. Now we discuss these problems and their solutions step by step.

Common issue Solution

The drain pump has an impeller motor that helps to force water through the drain hose. When you give proper electricity to this motor but it’s not run. You need to replace it with new or repair it from a professional.

Common Issues and situations

  1. Incomplete wash cycle
  2. Drain is clogged
  3. Drain hose is kinked
  4. Drain hose is clogged
  5. Garbage disposal incorrectly installed
  6. Stuck check valve
  7. Failed drain pumpDran impeller
  8. Drain Impeller
  9. Drain solenoid kit
  10. Pump and Motor Assembly
  11. Check ball
  12. Water pump belt

1. Incomplete Wash Cycle

This is necessary to check the last wash cycle was completed properly or not. When your dishwasher is complete” Clean” light is indicated. It is a sign that your dishwasher has no problem. If the wash cycle of the dishwasher is disturbed its means it has a problem, then you close the door and press the start button of the dishwasher again to complete the wash cycle.

2. Drain is Clogged

Use the drain clogged when it fills with garbage separate it and clean it. Now attach with a dishwasher again. This is a simple process to do when you can not do this whirlpool dishwasher is not drained and work properly.

3. Drain hose is kinked

The drain hose commonly runs under the dishwasher to the drainpipe placed usually below the sink. If this pipe is pinched or kinked replace it with a new drain hose.

4. Drain hose is clogged

Remove the drain hose or disposal from below the sink and put it into the bowl. Then remove clogging from it. If not properly removed blow out. When there is something serious in it, come out from the kitchen and order to clean it to professional or replace it.

5. Garbage disposal incorrectly installed

It commonly happens sometimes garbage disposal is newly installed but in the wrong way. On the other hand, it’s not properly fixed with the dishwasher. Garbage disposal is attached to the right side of the dishwasher. When the disposal bin is incorrectly installed dishwasher has not done the draining process properly.

6. Stuck check valve

A sixth common problem is when your dishwasher is not properly drained. Valved is placed underneath the dishwasher. It’s before the drain hose. The valve is ultimately one way, allowing water to drain but not return to the dishwasher. Now you remove it from the dishwasher. Check the valve is clean and open correctly.

7. Failed drain pump

If you do not see all these problems in the dishwasher. Pour the water in it and check its pump if it’s a failure then replace it with a new one.

8. Drain Impeller

Drain impeller placed for the purpose of pushing water from the drain hose and the garbage disposer. This happens that the impeller is broken and the dishwasher drain not working.

9. Drain solenoid kit

Solenoid kit helps to open the drain valve for the purpose of existing water from the dishwasher. Sometimes drain kit is failed to open the valve water is stuck in the dishwasher not to drain.

10. Pump and Motor Assembly

Both pump and machine play a vital for checking why the whirlpool dishwasher is not draining. The motor drive is an impeller that forces the water from the drain hose. If this motor is run during the drain cycle, check for a blockage in the drain line. If the motor is not run during the cycle need pump of the motor is replaced.

11. Check ball

It is a very common cause to check the ball in the valve it’s stuck the water in the dishwasher not helps to return it from the pipe. It is happening when the ball is struck. Check the ball and is stuck and try to free it.

12. Water pump belt

I break the water pump belt in most of the cases but there are few dishwasher old models that have a water pump belt. Its have a different number belt and has been fixed with a different number of the dishwasher. This is connected with the lower panel and easy to remove when it’s broken or worn to replace it with new.

Conclusion

These are the major reasons to find out your dishwasher if it’s not draining properly. Keep these causes in front of your eyes and maintain your dishwasher at home. These are the easy and home appliance step discuss for the safety of your dishwasher.